Skip to main content

TECHNICAL DATA / DEVICE SELECTION

SD-2001Datasheet

EN 14604-certified optical smoke alarm with LoRaWAN event reporting and a built-in non-replaceable battery with an 8–10-year stated operational lifetime.

SD-2001 device view
SD-2001 / Device view
Document
DS-SD-2001
Revision
2.1
Detection
Optical smoke sensor
Power
Built-in battery
Operational lifetime
8–10 years
Connectivity
LoRaWAN

Product overview​

The YOBIIQ SD2001 is a battery-powered optical smoke detector and audible smoke alarm with built-in LoRaWAN communication. Its optical sensor is designed to detect smoke from slow, smouldering fires, while LoRaWAN reports detector events to a monitoring application.

The SD2001 is powered by a built-in non-replaceable, non-rechargeable battery. Its stated operational lifetime is 8–10 years, depending on environmental conditions. Plan replacement and maintenance in accordance with the supplied product documentation and applicable local requirements.

The smoke chamber, integrated insect screen and automatic dust compensation are designed to reduce nuisance alarms. Suitable locations may include living rooms, bedrooms, hallways, landings and dining rooms, subject to approved installation instructions and local siting rules. The SD2001 is stated to meet EN 14604 and Grade F1 under BS 5839-6.

Why choose SD-2001?​

CapabilityBenefit
Optical smoke detectionDetect smoke from slow, smouldering fires in suitable residential locations.
Insect screen and dust compensationHelp reduce nuisance alarms caused by insects and dust accumulation.
LoRaWAN event reportingSend recorded detector events and supported status information to a monitoring application.
Built-in long-life batteryInstall without a mains connection or routine battery replacement; stated operational life is 8–10 years, depending on environmental conditions.
Test and hush buttonTest locally, hush a smoke alarm for 10 minutes, or hush low-battery warning beeps for 10 minutes.
Wired interlinkConnect compatible YOBIIQ smoke alarms into a wired alarm group.
SD2001-RF wireless interlinkGroup compatible YOBIIQ RF smoke alarms without a wired interlink.
SD2001-TH environmental sensingAdd temperature and humidity sensing for environmental monitoring.
SD-REMOTE accessoryTest and configure compatible wireless alarms from floor level, reducing ladder use during setup.
warning

The SD2001-TH is a smoke detector, not a heat detector as defined under EN 54-5 or BS 5446-2. Its temperature and humidity sensor is for environmental monitoring only. Temperature does not trigger the smoke alarm.

Applications​

ApplicationExample uses
Homes and apartmentsInstall in suitable living rooms, bedrooms, hallways, landings and dining rooms, following approved siting guidance.
Multi-apartment buildingsInterlink compatible detectors so alarms can be shared across a group.
Holiday and vacation homesMonitor reported detector events remotely over LoRaWAN.
Residential property portfoliosReview detector events across apartments and managed homes where network coverage is available.
Installation and maintenance teamsUse local test and hush controls or SD-REMOTE to configure and test compatible RF detectors from floor level.

LoRaWAN reporting and remote testing complement, but do not replace, the local audible alarm, required inspections or maintenance. Check network coverage, interlink compatibility and local installation requirements for each property.

Electrical specifications​

ParameterValue
Power supplyBuilt-in non-replaceable, non-rechargeable battery
Stated operational lifetime8–10 years, depending on environmental conditions
Standby power consumptionLess than 0.2 W;
Audible alarmMinimum 85 dB(A) at 3 m; confirm against the SD2001 variant documentation
Local controlsTest button; smoke-alarm hush and low-battery warning hush, each for 10 minutes

Communication and configuration​

ParameterSpecification
LoRaWAN version1.0.4
Device classClass A
ActivationOTAA
Radio regionsEU868, IN865
Maximum transmit power14 dBm at 868 MHz, 23 dBm at 865 MHz
LoRa antennaBuilt-in; external SMA option
Local wireless interfaceBLE with password authentication
Mobile configurationKibi Mobile App
Device-to-device communicationYOBIIQ D2D
AutomationOnboard schedules, event-driven and threshold logic
Network securityLoRaWAN AES-128 encryption and OTAA activation

Integrate with ChirpStack, The Things Network, LORIOT or a private LoRaWAN network server. Match the radio region, device profile and payload decoder to the installed unit.

Test / Hush Button​

ParameterValue
Event handlingEvents are recorded in the detector and communicated over LoRaWAN
Testing and hushLocal test; smoke alarm hush and low-battery warning hush, each for 10 minutes

Mechanical and environmental specifications​

ParameterValue
Enclosure dimensions120 mm diameter; confirm against the supplied SD2001 documentation
Enclosure material / colourPC UL94-V0 / white; confirm against the supplied SD2001 documentation
Enclosure protectionIP20; confirm against the supplied SD2001 documentation
Approximate weight102 g; confirm against the supplied SD2001 documentation

Use the supplied installation instructions for siting, environmental limits and maintenance. Battery lifetime depends on environmental conditions and operating profile.

Variants​

ModelDescriptionSKU
SD2001Battery-powered smoke detector250103
SD2001-RFBattery-powered smoke detector with radio interlink250104
SD2001-THBattery-powered smoke detector with temperature and humidity sensor250105
SD-REMOTERemote for configuring smoke detectors250041

SD-REMOTE is an accessory rather than a smoke detector variant. Confirm model-specific ordering codes, interlink compatibility and sensor options before ordering.

Certifications & Compliance​

Certification / ComplianceDetails
Electromagnetic CompatibilityEMC 2014/30/EU (SS-EN 55032:2015, SS-EN IEC 61000-6-1, -2, -3, -4)
Electrical SafetyLVD 2014/35/EU (IEC 62368-1:2018)
RadioRED 2014/53/EU (EN 300 220-1, EN 300 220-2, EN 301 489-1, EN 301 489-3)
RoHSRoHS 2002/95/EG
Smoke alarm product standardEN14604:2005/AC:2008
Domestic alarm-system gradeGrade D1 under BS 5836-6
HS Code8531 10 30
Country of OriginChina

Confirm the applicable declaration and certificate for the supplied version before release. Compliance references must be checked against the specific SD2001 variant.